OUR Products
Product type
Crystalline Waterproofing Product
Packing
25 kg
Typical Applications
Unique waterproofing for basement, bathroom slab, tunnel, swimming pool, lift pit, planter box & concrete pipes.
Advantages
Forms insoluble crystals within pores of concrete to stop any ingress of water. Can be applied from negative side also.
Coverage / Dosage
1 coat : 0.8 kg/m sqr / coat
2 coat
0.7 kg/m sqr/ coat
Application by brush
Product type
Two Component Cementitious
Elastomeric Waterproof Coating
Packing
50 kg (Powder: 34 kg) (Liquid: 16 kg)
Typical Applications
Waterproofing of concrete and masonry surface, terrace, basement, machinery pits, reservoirs, swimming pool, sunken, wet areas etc.
Advantages
UV resistant, Highly flexible waterproof coating. Good elasticity to take care of movements of concrete.
Coverage / Dosage
2.5 kg/m² in two layers to achieve, 1.5mm thickness.
Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Two Component Cementitious Flexible Waterproof Coating
Conforms to IS 6582 & ASTM D 2370
Packing
50 Kg (Powder: 40 Kg) (Liquid: 10 Kg)
Typical Applications
Sunken, small planters, terrace, balconies, basement and underground
structure.
Advantages
UV resistant, exhibits good water proofing character and flexible.
Coverage / Dosage
2.5 kg/m for of 1.5mm thickness. Reinforcement of fibreglass net of
40/50 gsm is optional.
Product type
Two component Anti-Root Cementitious Elastomeric Waterproof Coating
Packing
50 kg (Comp A: 34 kg) (Comp B: 16 kg)
Typical Applications
Same as above but in addition the same can be used for Terrace / Podium
Garden where anti-root properties are required.
Advantages
Same as above with addition of anti-root properties.
Coverage / Dosage
2.5 kg / m for 1.5mm thickness. For higher thickness higher consumption
shall be required. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Single Component Cementitious waterproof Coating
Packing
25 kg
Typical Applications
Waterproofing of intermediate floor, toilet wall facing to shower and for non critical areas of balcony & portico.
Advantages
Excellent adhesion. Easy to apply.
Coverage / Dosage
1 – 1.5 kg/m in two coats. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Moisture Cured High Tensile Elastomeric Modified Polyurethane Conforms to ASTM C 836 & C 898
Packing
22 kg
Typical Applications
Waterproofing of terrace, basement retaining walls, sunken slab, podium, roof garden and substrate of any geometrical shapes
Advantages
Easy to apply & repairable, seamless waterproofing, excellent adhesion to concrete. High elongation and solid content. Totally impermeable. Use of reinforcement is optional.
Coverage / Dosage
1.2 kg / m² for 1.0 mm DFT. Applicable by brush / roller / airless spray. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Water Based UV Resistant Elastomeric Modified Polyurethane Conforms to ASTM C 836 & D 6083
Packing
25 kg
Typical Applications
Waterproofing of terrace, parking area, podium, roof garden and substrate of any geometrical shapes.
Advantages
Eco friendly water based green product. High solid content with good elongation property. Can be applied on moist roof. Totally impermeable and good crack bridging property. Available in black and white colour.
Coverage / Dosage
1.85 kg/m² for 1.0 mm DFT. Applicable by brush/roller / spray. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
UV Resistance Single Component Aliphatic Polyurethane Conforms to ASTM C 836 & C 898
Packing
20 Kg
Typical Applications
All non-trafficable and exposed terrace of any shape, water bodies, swimming pool & any other exposed structure.
Advantages
UV resistant, Easy to apply & repairable. Excellent adhesion to concrete & metal. Barrier coat against water ingress. Available in various colour shades. Liquid membrane with high solid content & elongation.
Coverage / Dosage
1.4 kg/m² for 1.0 mm DFT. Applicable by brush/roller/airless spray. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Two Component Liquid Applied Polyurethane Water Proofing Membrane Conforms to ASTM C 836 & C 898
Packing
15 kg
Typical Applications
Roofs and terraces, podium, retaining walls, bath room under tiles, swimming pool and tunnels.
Advantages
Easy to apply. Excellent adhesion. Resistant to water and frost. Elastic even at low temperature. Resistance to dilute acid and alkali.
Coverage / Dosage
1.3 kg / m² for 1.0 mm DFT. Applicable by brush / roller / airless spray. Reinforcement of fibreglass net of 40/50 gsm is optional.
Product type
Single Component Polyurethane Primer
Packing
20 kg
Typical Applications
Primer for concrete / metal surfaces.
Advantages
To enhance adhesion. Highly penetrative in concrete surface and chemically resistant.
Coverage / Dosage
100 ml/m²
Product type
Non-Shrink Fast Setting Hydraulic Cementitious Compound
Packing
12 kg (12 x 1 kg), 25 kg
Typical Applications
Crack filler & instant stopper of leakages in concrete & masonry.
Advantages
Non-shrinkable but expand slightly while setting. Can stop leakage under/against running water.
Coverage / Dosage
Mix 180 ml of water per 1 kg of Shalimar Dam-It.
Product type
Two Component Polymer Modified Cementitious Repair Motar
Packing
20 kg Pack (Powder: 17.8 kg, Liquid: 2.2 kg)
Typical Applications
Applicable over defective old mortar/ screed showing water seepage through cracks of basement, vertical wall areas like parking deck, ramp, marine structure, pavement & walkways. Thickness can be built up from 13 – 50 mm.
Advantages
Excellent adhesion with old & new mortar / concrete. Reduces permeability & improves abrasion.
Coverage / Dosage
Consumption vary on surface conditions / Crack opening. Add extra 0.6 l of water per unit pack for workable consistency.
Product type
Crack Sealer
Packing
12 kg (12 x 1 kg)
Typical Applications
Crack repair of internal/external wall & roofs for crack size up to 3 mm.
Advantages
Flexible material hence accommodate movement of concrete or mortar, seal the cracks against water seepage. Surface is paintable after repair with PlastiSeal.
Coverage / Dosage
Consumption depends on crack size.
Product type
Single Component Cementitious Crack Filler
Packing
25 kg
Typical Applications
Crack Filling. Level undulation on un-plastered or plastered ceilings and wall prior to painting. Provide smooth finish to brick, stone and wood works. Excellent sculpting material.
Advantages
Excellent crack bridging nature, low shrinkage, good adhesion with old and new mortar / concrete. Resistant to carbon Di-oxide attack. Good water vapour permeability
Coverage / Dosage
Bulk density: 1.2 ± 0.10 grms / cm Applied by mixing with water. PlastiSeal P : Water :: 2.5:1. Can fill 3 to 5 mm wider static cracks.
Product type
Two Component Epoxy Bonding Adhesive / Primer for Concrete
Packing
20 kg Pack (A : 1.46 kg, B : 0.54 kg) x 5
Typical Applications
Moisture insensitive adhesive for bonding old concrete with new concrete / flooring, repairing of structural members. Priming, sealing, bonding toppings, general adhesive.
Advantages
Low viscous, moisture insensitive, flexible with excellent adhesive property to bond concrete, steel or wood together. Acts as a protection against corrosion and acids.
Coverage / Dosage
Theoretical Coverage:
Primer: 200-250 grms/m sqr
Bonding coat:250-300 grms/m sqr
150-200 micron DFT.
Product type
Single Component Free Flow Non-Shrink High Strength/ Fluidity Grout
Packing
25 kg
Typical Applications
Grouting of machinery and equipment. Bridge seats, structural columns, bending plates, crane rails & anchorages.
Advantages
Non-shrink, free flow, cementitious high strength grout (equivalent to M50 grade strength) ready to use powder. Requires addition of water only
Coverage / Dosage
3.75 l of water required per bag of grout. 25 kg bag will yield around 0.0125 m³ of fluid grout. Achieves 2 strength of 500 kg/ cm in 28 days.
Product type
Single Component Free Flow Non-Shrink High Strength/ Fluidity Grout
Packing
25 kg
Typical Applications
Heavy duty grouting of machinery & equipment. Ball mills, petro chemical, fertilizer units, bridge bearing plates, textile machineries, anchor bolts / bars. Dg sets base foundation & fence posts
Advantages
High flowability, non- shrinkable & high early strength grout.
Coverage / Dosage
Mix 25 kg ShaliGrout 73 with 4.125 l of water to have an yields of 0.0125 m³. Compressive strength in 28 2 days is over 730 Kg /cm .
Product type
Single Component Free Flow Non-Shrink High Strength / Fluidity Grout
Packing
25 kg
Typical Applications
Used for filling machine pocket bolt when very high quick strength is required.
Advantages
High flowability, non shrinkable and high early strength grout.
Coverage / Dosage
Mix 25 kg Grout 90 with 4.125 l of water to have an yields of 0.0125 m³ Compressive strength in 28 days is 2 over 900 kg /cm .
Product type
Two Component Epoxy Injection Grout for Structural Strengthening
Packing
10 kg Pack (A : 1.70 kg, B : 0.30 kg) x 5
Typical Applications
Grout for permanent bonding of structural damage, parking, bridge, marine, retaining wall structure & earthquake damage repair. Vertical and overhead applications.
Advantages
Low viscosity for pressure injection of fine cracks. Moisture insensitive for bonding on both dry & damp surfaces. Provides a tough, weather resistant seal for pores of concrete. Penetrates deep into crack & fissures.
Coverage / Dosage
Specific Gravity: 1.12 + 0.02 Consumption depends upon area, shape and usage.
Product type
Polyurethane Based Water Reactive Injection Grout
Packing
20 kg Pack
Typical Applications
Stopping leaks in structures. Stopping water oozing from ground, dams and banks. Leaks from large and small caliber sewer pipes, concrete crack and expansion joints. Leaks into building structures & tunnel.
Advantages
Reacts even with sea water, mineral water, regardless of water temperature. Short gel time forms highly tough & resilient gel. Excellent adhesiveness to applied materials. Impregnates even smallest cracks & pores due to surface-active property & volume increase during reaction.
Coverage / Dosage
Specific Gravity : 1.06 – 1.10 Consumption depends upon area, shape and usage.
Product type
High Performance Polycarboxylated Ether based Superplasticiser
Packing
250 kg
Typical Applications
Used for self compacting high grade concrete for ready mix concrete, precast concrete etc
Advantages
High early strength. High water reduction with improved flowability. Conforms to ASTM C 494 Type G, IS : 9103.
Coverage / Dosage
0.2 – 1.0% by weight of cement. Actual dosage to be finalised after site trials
Product type
High Range Water Reducing Cum Retarding Admixture
Packing
20 kg & 200 kg
Typical Applications
Naphthalene based admixture for mass concrete, ready mix concrete, precast slabs, flowing concrete, heavily reinforced concrete & pump-able concrete.
Advantages
Super Plasticizer & set retarder. Increase work ability & strength without increase in cement content. Conforms to ASTM C 494 Type G, IS : 9103.
Coverage / Dosage
0.5 to 2.0% by weight of cement. Actual dosage to be finalised after site trials.
Product type
Chloride Free Superplasticiser for Pavement Quality Concrete
Packing
250 kg
Typical Applications
Excellent for use in high performance concrete like roads, runways, etc. Excellent pumpable property and suitable for highly reinforced concrete.
Advantages
Imparts improved workability, higher cohesion and strength. Superior water reduction to the extent of 25%. Conforms to IS:9103, BS:5075, Part 3 & ASTM-C-494 Type G.
Coverage / Dosage
0.6 to 1.5% by weight of cement. Actual dosage to be finalised after site trials.
Product type
High Range Water Reducing Plasticizer
Packing
20 kg & 200 kg
Typical Applications
Modified naphthalene based admixture for higher grade of concrete, railway sleeper, shell form, precast element, girder, foundation & slip form structures.
Advantages
Offers high work-ability, increases strength without increasing of cement content. Conforms to ASTM C 494 Type A & F; IS : 9103.
Coverage / Dosage
0.4% to 2% by weight of cement. Actual dosage to be finalised after site trials.
Product type
Water Reducing Admixture
Packing
20 kg & 200 kg
Typical Applications
Ligno sulphonate based water reducing admixture for column, beam, slab & all concrete structures.
Advantages
Reduces water & increase work ability, gives good cohesive concrete. Saves cement without loss of strength. Conforms to ASTM C 494 Type A ; IS : 9103.
Coverage / Dosage
0.2 – 0.5% by weight of cement. Actual dosage to be finalised after site trials.
Product type
Single Component Acrylate Based Primer for Concrete Surfaces
Packing
20 l
Typical Applications
Used as primer for concrete surface.
Advantages
Silane Siloxane based primer for priming substrate to form a good link for subsequent coating.
Coverage / Dosage
4-5 m / l .
Product type
Acrylic Curing and Sealing Compound Conforms to ASTM C 309 Types 1 & 1 D, Class B
Packing
20 l
Typical Applications
Industrial floor slab, warehouse, concrete floor toppings, column & beams of marine structures, parking areas.
Advantages
Forms a transparent/coloured film to cure concrete surfaces newly cast resulting curing, hardening dust proofing. Seal all the pores of concrete with improved abrasion by impregnating into surface pores. Chemical resistant.
Coverage / Dosage
4-6 m / l for two coats.
Product type
Paraffin Based Curing Compound Concrete Conforms ASTM C 309, Types 1 & 1D, Class B
Packing
20 l & 200 l
Typical Applications
Mass concrete structures, canal, column, beams, bridge deck and tall structures, runways, roads etc.
Advantages
Wax based curing compound, spray able, easy to apply, gradually disintegrates leaving stain free surface.
Coverage / Dosage
Textural surface: 4.9 – 7.4 m / l 2 Smooth surface: 7.4 – 8.6 m / l
Product type
Water Based Curing & Sealing Compound for Concrete Surface Conforms to ASTM C 309
Packing
20 l & 200 l
Typical Applications
Used for curing of all types of concrete structure.
Advantages
Sodium Silicate based compound to seal, cure & harden in one operation. Solvent free product. Facilitates direct application of subsequent treatment like waterproofing, painting & anti-carbonation coating.
Coverage / Dosage
8 m / l
Product type
Solvent Based Synthetic Resin Containing Aluminium Pigment Conforms to ASTM C309.81, Type 2 & BS 7542
Packing
20 l & 200 l
Typical Applications
Curing compound for application on highways, runways, apron areas at airport, columns, retaining walls & canal areas.
Advantages
Seals concrete surface forming a membrane which reflects sunrays adding efficiency, increase hardness & abrasion resistances, reduce dusting. Water based also available.
Coverage / Dosage
0.120 – 0.240 l / m sqr
Product type
Non Metallic Floor Hardener
Packing
50 kg
Typical Applications
Car park areas of commercial and public buildings, food processing & electronics industries, breweries, restaurants, diaries, automobile showrooms and service centers, warehouses, loading docks and high traffic aisleways.
Advantages
Being quartz based it does not rust, it has two times more abrasion resistance than the normal concrete.
Coverage / Dosage
Light traffic: 3.5 – 4.0 kg /m 2 Medium traffic: 4.5 – 5.0 kg /m2 Heavy traffic: 6.5 – 7.0 kg /m
Product type
Non-Oxidizing, Heavy Duty Metallic Floor Hardener
Packing
50 kg
Typical Applications
Industrial floors, warehouses, processing plants, vehicle maintenance shops, loading docks, main, high traffic aisle ways/ gangways, machine shops, breweries, bottling plants, joint shoulders reinforcement.
Advantages
Being non ferrous it does not rust, it has six times more abrasion resistance than the normal concrete.
Coverage / Dosage
Normal traffic: 3-5 kg/m2 Heavy traffic: 6-12 kg/m
Product type
Two Component Epoxy Primer for Concrete Surfaces
Packing
24 kg Pack (A : 4 x 4 kg, B : 2 kg x 4)
Typical Applications
Primer for all types of epoxy self level flooring & coating.
Advantages
Penetrates into the pores and gives excellent bonding with the substrates. Improve compatibility & bonding with subsequent coating.
Coverage / Dosage
6 – 7 m² / l
Product type
Three Component Chemical & Abrasion Resistant Epoxy Screed
Packing
20 kg Pack (A : 1.65 kg, B : 0.59 kg, C : 17.76 kg)
Typical Applications
For use in high impact, abrasion, fork lift movement & areas exposed to chemical & oil spillage such as processing plants, warehouse, fertilizer plant, paper mills/textile mills, automobile plant & power houses.
Advantages
Very good resistance to abrasion. Excellent bond to concrete. Strong chemical resistance. High resistance to impact load. Durable floor, laid in a thickness of 3 to 6 mm.
Coverage / Dosage
1.8 m² / 20 kg for 5 mm thickness. A coat of ShaliPrime 2E is mandatory.
Product type
Three Component Epoxy Self-Leveling Underlay Epoxy Screed
Packing
26 kg Pack (A : 4.32 kg, B : 3.09 kg, C : 18.59 kg)
Typical Applications
Use for dust proof, clean & hygienic surfaces like pharmaceutical unit, food factory, operation theater & manufacturing units.
Advantages
Seamless, good chemical resistant, durable & having high strength.
Coverage / Dosage
10 m²/ per 37 kg bag for 2 mm thickness. A coat of ShaliPrime 2E is mandatory
Product type
Four Component Pigmented Self Leveling Epoxy Floor Top Coat
Packing
26 kg Pack (A: 5.25 kg, B: 3.82 kg, C: 15.89 kg D: 1.04 kg)
Typical Applications
For dust proof, clean & hygienic surfaces like pharmaceutical, dairy, food processing plant, clean room, automobile industry & work shop.
Advantages
Anti-fungal, anti-bacterial, acid & alkali resistant, easy to clean, attractive colour shades.
Coverage / Dosage
8 m² / per 26 kg bag for 2 mm thickness. A coat of ShaliPrime 2E is mandatory.
Product type
Single Component Cementitious Self Levelling Underlay
Packing
25 kg
Typical Applications
Underlay for wooden / PVC / Carpet / Tile / Marble floors.
Advantages
Rapid installation for floor coverings, Excellent adhesion, Thickness of application ranges from 3 mm to 25 mm, Chloride free constituents, Very low linear shrinkage
Coverage / Dosage
Theoretical coverage for 25 kg bag: 4.0 m² for 3 mm thickness 1.8 m² for 12 mm thickness 0.61 m² for 25 mm thickness ShaliSBR Latex to be used as primer.
Product type
Two Component Polyuslphide Sealant – Pouring / Gun Grade Conforms to IS:12118 : Part 1, 1987, 4254, BS 5212 & ASTM C 920
Packing
16 kg (4 x 4 kg)
Typical Applications
Expansion joints in industrial, commercial or residential buildings. Joints in concrete roads, bridges, subways, flyovers & airport runway, water retaining structures like water tank, swimming pool including decks, aqua ducts, dams, canals & reservoirs. Nuclear Power station reactor domes. Joints between concrete pipe lines & roof light.
Advantages
UV resistant, good adhesion property, easy to handle, flexible, fuel/fire resistance and chemical resistance. MAF – Butt Joints ± 25, Lap Joints: ± 50.
Coverage / Dosage
Specific Gravity: PG: 1.55 – 1.65 GG: 1.60 – 1.70 Primer is necessary for strong bonding with substrate. Bondbreaker at bottom is recommended.
Product type
Two Component Pouring Grade Polyurethane SealantPouring / Gun Grade Conforms to BS: 5212- 1990
Packing
16 kg Pack (4 x 4 kg)
Typical Applications
Expansion joints in industrial, commercial / residential buildings, docks and harbors. Joints in concrete roads, bridges, subways, flyovers & airport runway, water retaining structures like water tank, swimming pool, aquaducts, dams, canals & reservoirs. Nuclear power station reactor domes. Joints between concrete pipe lines & roof light. Window sealing for air conditioned coaches.
Advantages
UV resistant cold applied high performance sealant. Chemical and jet fuel resistance. Movement compatibility (MAF) ± 30%. Elongation more then 300%. Shore o ‘A’ hardener @ 25 C is 15 ± 2.
Coverage / Dosage
Specific Gravity: 1.45 ± .05 Available in grey colour. Primer is necessary for strong bonding with substrate. Bondbreaker at bottom is recommended.
Product type
Single Component Polyurethane Joint Sealant Conforms to BS:5212, ASTM C 920, ISO – 11600
Packing
600 ml sausage
Typical Applications
Expansion and construction joint sealants for runway, roads, building bridge decks, docks, harbors. Civil structures including building, residential, commercial, industrial & prefabricated constructional panels.
Advantages
Fuel resistant, excellent adhesion to most of the building materials, good weathering and ageing properties, excellent workability.
Coverage / Dosage
Density 1. 20 – 1.25 grms/ml
Product type
Two Component Primer for Polysulfide / Polyurethane Sealant
Packing
1l Pack (500ml each)
Typical Applications
Primer for vertical surface to facilitate proper bonding of sealant with Concrete, Steel, Aluminium and Glass surface.
Advantages
Low viscosity and easy to apply. High penetration to concrete surface. High wetting property for non porous surface.
Coverage / Dosage
On Concrete Surface – 7 m /l 2 On Metal Surface – 10 m /l
Product type
Two Component Epoxy Modified Sealant
Packing
15 kg Pack (A: 1.10 kg, B: 1.40 kg) x 6
Typical Applications
For application in Control joints, construction joints in industrial, commercial and Tri-mix floors. Designed for use under ACI 302, Section 4.10 recommendations for epoxy joint fillers.
Advantages
High strength / modulus of elasticity. High strength. Impermeable to liquid & water vapour. Suitable to dry & damp concrete surfaces (moisture tolerant). Hardening is not affected by humidity. Thixotropic: non sag in vertical & overhead application. Solvent free. Hardens without shrinkage. No primer required. Good chemical resistance.
Coverage / Dosage
Specific Gravity: 1.30 – 1.50
Product type
Fast Setting Dry Set Tile Adhesive Mortar
Packing
25 kg
Typical Applications
Suitable backings, when properly prepared, include plumb and true masonry concrete, cured portland cement mortar beds, bricks, unglazed ceramic tiles and marble.
Advantages
Pre-packed product requiring only direct mixing at site. High bond strength. Ideal for vertical/horizontal applications of granite, marble etc. Excellent grab during open time. Quick fixing, reduces labour costs. Can be used in the interior/ exterior of buildings.
Coverage / Dosage
Bulk Density : 1650 kg / m approx Mix potable water to ShalliTile Glue in the ratio of 1 : 3 by volume.
Product type
Single Component Cementitious Tile Joint Filler
Packing
12 kg Pack (12 x 1 kg)
Typical Applications
For filling the tile grooves. Waterproofing characteristic and is available in colours as per shade card.
Advantages
Low cost service life – mould resistant, tropical grade. Easy to apply – just add water for a thixotropic, non-slump grout. Can be used in submerged conditions. Available in a range of attractive colours
Coverage / Dosage
Mix with potable water in the ratio 1:3 (one part water and 3 part tile grout). Joint width upto10 mm.
Product type
Three Component Epoxy Based Tile Joint Filler
Packing
20 kg Pack (A: 0.91 kg, B: 0.34 kg, C: 3.75 kg) x 4
Typical Applications
Filling the grooves for hygienic conditions like Pharmaceutical unit, food manufacturing unit & swimming pools. Available in various colours.
Advantages
Chemical resistant, anti-fungal and anti-bacterial.
Coverage / Dosage
Coverage for 5 kg unit: 200 RMT approx for 2 mm x 5 mm groove size.
Product type
Three Component Epoxy Based Kota Stone / Tile Joint Filler
Packing
20 kg Pack (A: 1.82 kg, B: 0.78 kg, C: 7.40 kg) x 2
Typical Applications
Grout for filling kota stone joints. It supports the joint edges and reduces breaking of edges due to wheel traffic.
Advantages
Easy to use and apply. Reduces floor joint repairs and maintenance. Suitable for filling cracks in older floors.
Coverage / Dosage
Mixed Density: 1.63 ± 0.03 gm/cc
Product type
Chloride / Sulphate Free Liquid Rust Remover
Packing
1 kg & 20 kg
Typical Applications
Used for rust removal from old metal surfaces.
Advantages
Easy to use, free from chloride and sulphate. Works efficiently even at difficult areas.
Coverage / Dosage
0.12 – 0.15 kg / m .
Product type
Single Component Water Based Rust Converter Cum Primer
Packing
1 kg & 20 kg
Typical Applications
Used on all old metal surface before top coat paint like vehicle body, railing, metal sheet & tanks.
Advantages
Easy and fast application since no hassle of removing the rust.
Coverage / Dosage
10 -12 m /l .
Product type
Two Component Anti-Corrosive Chemical Resistant Novolac Based Epoxy
Packing
19.5 l Pack (15 l & 4.5 l )
Typical Applications
For all highly corrosive environment like refinery and fertiliser plants. Applicable on both metal and concrete surfaces.
Advantages
Excellent resistance to acid and alkali. Coating can withstand temperature around 90°C.
Coverage / Dosage
5-6 m /l with 100 micron DFT. Recommended DFT 250 micron.
Product type
Two Component Polyamide Epoxy Intermediate Anti-Corrosive Coat
Packing
15 l Pack (A: 12.75 l, B: 2.25 l)
Typical Applications
Application on metal structures, exposed to aggressive coastal & corrosive industrial environment. Industries like petrochemical & refinery, fertilizer & steel plants will have enormous uses.
Advantages
Two component system offering high abrasion and chemical resistance.
Coverage / Dosage
4.5 – 5 m /l for 75 – 100 micron DFT.
Product type
Two Component Anti-Corrosive / Protective Flexible Epoxy Coating
Packing
20 kg Pack (A : 15 kg, B : 5 kg)
Typical Applications
Metal/steel structure. Sheet/pipe piling. Dams, barrage gates, penstocks. Crude oil storage tanks. Foundation walls and sumps. Concrete & steel surfaces in sewage treatment plant. Paper mills, chemical plants and underground structures.
Advantages
Flexible anti-corrosive/preventive coating for structures – MS or concrete – even where the structure is in continuous contact with water. Excellent resistance, thermal shock and abrasion. Cures to a hard, smooth and flexible surface with excellent resistance to sea / salt water, oil, acids, alkalis, crude oil & minerals.
Coverage / Dosage
200 – 300 ml / m in 2 coats for 120 – 150 micron DFT.
Product type
Amine Based Liquid Grinding Aid For Horizontal Ball Mill Conforms to ASTM C 465
Packing
200 kg
Typical Applications
For grinding of clinker in cement mills.
Advantages
Improves cement grinding / efficiency/ quality / cement performance / flow / particles size distribution / characteristics of cement. Decreases grinding temperature. Avoids agglomeration of the cement particles. Reduces over grinding silo clogging due to materials build-ups. Allows increase in filler content in composite cement.
Coverage / Dosage
For ShaliGrind 3000 : 0.05 – 0.3% by weight of clinker. For ShaliGrind 3501 : 0.05 – 0.2% by weight of clinker.
*Depending on type of clinker, type of mill and desired results.
Product type
Glycol Based Liquid Grinding Aid for Vertical Ball Mill
Packing
200 kg
Typical Applications
For grinding of clinker in cement mills.
Advantages
Improves cement grinding / efficiency / quality / flow / cement performance / particles size distribution. Reduces silo clogging due to materials build-ups. Allows increase in filler content in composite cement. Decreases grinding temperature. Avoids agglomeration of the cement particles. Reduces over grinding.
Coverage / Dosage
For Grind 4000: 0.05 – 0.2 % by weight of clinker.
For Grind 4500: 0.05 – 0.150 % by weight of clinker.
For Grind 5000: 0.05 – 0.100 % by weight of clinker.
*Depending on type of clinker, type of mill and desired results. 0.05 – 0.2% by weight of clinker.
Product type
Shuttering Oil / Concrete Form Release Agent
Packing
20 l & 200 l
Typical Applications
Oil based form release agent for steel, wood, concrete moulds, plastic & fiberglass forms.
Advantages
Concrete form release agent. Provides a defect free clear surface.
Coverage / Dosage
20-36 m / l depending upon the nature of surface.
Product type
Water Based Form Release Agent
Packing
20 l & 200 l
Typical Applications
Water based form release for steel, wood or concrete moulds. Diluted with water in 1:5 ratio.
Advantages
Concrete form release agent. Provides a defect free clear surface.
Coverage / Dosage
25-36 m / l of the mix
Product type
Thermomastic Road Marking Paint
Packing
25 kg
Typical Applications
Hot applied road marking paint for highways, zebra crossing, car parking and inside of plant and big housing societies / colonies.
Advantages
Excellent bond with bituminous and concrete surface, fast drying. Retro reflective when light falls and skid resistant with long life. Available as per BS and MORTH specification.
Coverage / Dosage
5 kg / m² for 2.5 mm thickness. Available in white & yellow colour. Concrete surface needs a primer coat. Drop on glass beads are spreaded simultaneously over coating through machine during application.
Product type
Single Component Cementitious Crack Filler
Packing
20 l
Typical Applications
As primer before application of road marking compound on concrete surface.
Advantages
Easy to apply, Facilitates bonding of Mark on concrete surface.
Coverage / Dosage
10 -12 m / l
Product type
Cold Applied Water Based Road Marking Paint
Packing
20 l
Typical Applications
It can be applied on bitumen and concrete pavement with a spray applicator or by brush. Can be applied on zebra crossing, path dividers, speed breakers and other similar markings.
Advantages
Eco-friendly, fast drying, durable and strong adhesion with easy application.
Coverage / Dosage
450-500 grms/m sqr . Recommended DFT 300 microns. Drop on glass beads are supplied in the carton along with the paint. Available in white & yellow colour.
Product type
Two Component Solvent Free Acrylate Based Coloured Slurry Seal
Packing
10.1 kg Pack (A: 10 kg, B: 0.10 kg)
Typical Applications
Parking bays, Highway road signaling, Bus lanes, Cycle tracks, Sports venues and stadium tracks. Walkways / pathways, Tunnel road, Aesthetic application & landscaping.
Advantages
Solvent/voc free, good friction/skid resistance, tough & durable. Excellent UV/ ageing resistance, rapid cure, cold pour & ready to use. Does not require any heating, excellent resistance to chemical / salt water / crude oil, acids / alkalis. Compatible with both concrete and bituminous pavement.
Coverage / Dosage
3.2 kg/m² for 1.2 mm DFT